Air Swept pulverizer

Yagnam Air Swept Mill Advantages:

YAGNAM Air Swept Mill is a patented design developed after years of experiments and in-plant trials with a wide range of products. Modern benefits offered by YAGNAM Air Swept Mill are the following.

  • Suitable for dry grinding of products.
  • Grinding is carried out in a cool atmospheric temperature, which guarantees against any thermal degradation of product quality & flavors.
  • The pulverized product can easily qualify for AGMARK seal (in case of spices & food Products).
  • Continuous grinding, leading to increased production per shift & faster return on investment.
  • Compact design occupies very little space.
  • Dust free operation. No wastage of product & no pollution hazards.
  • Very easy to operate. Requires no skilled labor.
  • Very low maintenance. Saves on recurring costs.
  • Available in Mild Steel & Stainless Steel contact parts.
  • Approved by KVIC, & all leading State Financial corporation’s & Nationalized Banks.

 

Rugged Construction:

 

YAGNAM Air Swept Mill is manufactured from specially selected materials. The beaters are interchangeable & reversible. Thus, the pulverizer will last a lifetime with minimum replacement of parts. YAGNAM Air Swept Mill with mild / alloy steel contact parts construction is recommended for hard and medium hard material.

 

Principle of Operation

 

The flow of material from the feeding hopper is regulated by means of a vertically adjustable slide to suit the load indicated by the ampere meter. The rotor with 12 hammers run clockwise looking from pulley side. Thus swinging hammers on the rotor passes just beneath the ratchet teeth liner fitted inside the top half of the grinding chamber, leaving a gap of 1.5mm between the liner teeth & the tips of the beaters. This cuts the material cut between the liner teeth like a sword with a scissors action, at the high speed up to 6000 RPM.

After the required size reduction, the material will pass through the appropriately adjusted classifier fitted inside the conical body end of the grinding chamber. No sieving is required, as the appropriate classifier is fitted, it will not allow coarser material to pass. The grinding is continuous. The air blower is fitted in adjusting side of the conical body which is generating air in the grinding chamber by forces the powder to pass through the blower which delivers the product through the pipeline into the cyclone separator. The dust is collected through the attached balloon (Kora cloth Bag) fitted on the discharge end. The balloon has to be tapped and shaken every half an hour to knock down the dust clogging the pores of the balloon cloth, so as to release the fresh air. The dust falls into the bag below. Thus, dust-free operation is possible with no wastage of product.

 

Specification

 

MODEL

ROTOR DIA

CHAMBER

MACHINE

RECOMMENDED MOTOR

OVER ALL DIM IN mm

Capacity

IN mm

WIDTH

RPM

HP

RPM

L

W

H

KG/HR UPTO

ASM-05

210

150

5040

05

2880

900

700

1800

20

ASM-10

300

200

4320

10

2880

1100

950

1900

45

ASM-20

450

220

4320

20

2880

1400

1100

2000

110

ASM-30

450

300

4320

30

2880

1400

1100

2000

145

ASM-40

600

360

2880

40

1440

1750

1400

1400

200

© 2018 Yagnam All Rights Reserved